Dmx Configuration; Dmx Mode - ProLights ECLIPSETU User Manual

ECLIPSE
13

3.8 DMX CONFIGURATION

ECLIPSE is equipped with different DMX configuration.
• Press the button MENU so many times until shows DMX CHANNEL, and press the button ENTER to confirm.
• Select the desired DMX configuration (1CH - 2CH - 5CH) through the buttons UP/DOWN.
The tables on page 15 indicate the operating mode and DMX value. The ECLIPSE is equipped with 5-pole
XLR connections.

3.9 DMX MODE

• Press the button MENU so many times until the display shows DMX ADDRESS, and press the button ENTER
to confirm.
• Press UP/DOWN button to select the desired value (001-512). Press and hold to scroll quickly.
• Press ENTER button to store.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
To able to operate the ECLIPSE with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the ECLIPSE. The other functions of the light effect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of Start address DMX Address Next possible start Next possible start Next possible start
DMX channels (example) occupied address for unit No. 1 address for unit No. 2 address for unit No. 3
5 33 33-37 38 43 48
DMX Address: 33 DMX Address: 38 DMX Address: 43 DMX Address: 48
. . . . . . . . . . . .
DMX512 Controller
Fig.5 - Example 5 DMX channels configuration