Recording Still Images - Sony HVR-S270J Service Manual

Recording pictures from a VCR (Continued)
DVCAM (DV) format compatible
device (p. 80).
3
Connect your VCR as a player to
your camcorder.
When an i.LINK cable is connected, the
format of the input signal (
or
indicated on the LCD screen of your
camcorder (This indicator may appear
on the screen of the playback device but
it will not be recorded).
4
Insert a cassette into the VCR.
5
Set your camcorder to recording
pause.
While pressing X (PAUSE), press both
z REC (record) buttons
simultaneously.
6
Start playing the cassette on your
VCR.
The picture played on the VCR appears
on the LCD screen of your camcorder.
7
Press X (PAUSE) again at the
point you want to start recording.
92
) will be
REC
F PAUSE SLO
8
Press x (STOP) to stop
recording.
b Notes
• You cannot record TV programs from the
HDV/DV interface (i.LINK).
• User bits are not recorded when dubbing from a
DVCAM (DV) device via an i.LINK cable.
• You can record pictures from DV devices only
in the DVCAM (DV) format.
• Note the following when connecting with an
i.LINK cable:
– The recorded picture becomes rough when a
picture is paused on your camcorder while
recording to a VCR.
– You cannot record the picture and sound
separately.
– If you pause or stop the recording and restart
it, the picture may not be recorded smoothly.
• If video signals inputted to your camcorder via
the HDV/DV jack experience the
phenomenon of jittering (variation in
frequency), that jittering is transmitted to the
video signals outputted from the COMPONENT
OUT jack and A/V OUT jack. When you
monitor a movie on a TV connected to your
camcorder via the COMPONENT OUT jack or
A/V OUT jack, images may be distorted or not
be displayed. Jittering will not affect recording
of the movie on a tape with your camcorder but
may affect recording of the movie with another
VCR connected to your camcorder via the
COMPONENT OUT jack or A/V OUT jack.
z Tips
• When a 4:3 video signal is input, it appears with
black bands on the right and left sides on the
screen of your camcorder.

Recording still images

Be sure to insert a "Memory Stick Duo" for
recording in your camcorder beforehand,
and assign [PHOTO] to any of ASSIGN
buttons (p. 48).
1
Perform steps 1 to 4 in
"Recording movies."