Step 6: Setting The Date And Time - Sony HVR-S270J Service Manual

Step 6: Setting the date and time

Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, [CLOCK SET] screen
appears every time you turn on your
camcorder or change the CAMERA/VCR
switch position.
z Tips
• If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the rechargeable battery and then set the
date and time again (p. 114).
MENU/STATUS switch
POWER
ON OFF
SEL/PUSH EXEC dial
Skip to step 4 when you set the clock for
the first time.
20
CAMERA SEL/PUSH EXEC
VCR
1
Push the MENU/STATUS switch
to MENU.
2
Select (OTHERS) by turning
the SEL/PUSH EXEC dial, then
press the dial.
OTHERS
RETURN
CAMERA PROF.
ASSIGN BTN
CLOCK SET
WORLD TIME
LANGUAGE
QUICK REC
DATE REC
[ MENU ] : END
3
Select [CLOCK SET] by turning
the SEL/PUSH EXEC dial, then
press the dial.
CLOCK SET
Y M
1
2008 -
[ MENU ] : CANCEL
- - : - - : - -
--:--:--:--
D
1 0 : 00
-