Recording Still Images - Tape Photo Recording - Sony Handycam DCR-HC20 Operation Manual
Digital video camera recorder
Hide thumbs
Also See for Handycam DCR-HC20:
- Operation manual (100 pages) ,
- Specifications (2 pages) ,
- Notes on usage (2 pages)
Table of Contents
Advertisement
Recordingstill
images
- Tape photo recording
You can record still images.
Before recording,
follow steps 1 to 7 in "Getting started"
(p. 11 -
p. 20).
PHOTO
LENS COVER sw_tch
POWER
switch
1
Set the LENS COVER
switch
to
OPEN.
Open
the LCD panel.
Slide the POWER
switch
until the
CAMERA
lamp lights
up.
00E
Si dethoPOWER
O0M _ff
switch
while
pressing the green
_0_
button.
4
Press and hold PHOTO
lightly.
You will hear a light beep sound and the
picture becomes
a still image. Recording
does not start at this point.
i_0,_ z
_
The indicator
ppoors
Press PHOTO
fully.
A shutter sound is heard, and the image is
recorded
with sound for 7 seconds.
The still image is displayed
on the screen
until recording
is completed.
To turn the power off
Slide the POWER
switch up to OFF (CttG),
then set the LENS COVER
switch to CLOSE.
O Note
• I[_iO appears when the tape photo recording does
not work.
"_" Tips
• YOU can record ahout 510 images in the SP mode
and about 765 images in the LP mode on a 60
minutes
tape.
• You can record still images using the sell:timer
recording
(p. 23).
24 Recording
Advertisement
Table of Contents
