Sony HVR-S270J Service Manual page 384

Attaching the supplied
microphone
REC CH SELECT
IN2
IN1
IN3
IN4
CH1 CH2
2CH MODE
1
Attach the wind screen B to the
supplied microphone A.
2
Place the microphone A in the
microphone holder C with the
model name facing upward, close
the cover, and shut the clamp.
3
Connect the plug of the
microphone to the AUDIO INPUT1
(L) jack D.
4
Put the microphone cable into the
cable holder E.
5
Select the channel with the REC
CH SELECT switch F.
See p. 45 for details.
z Tips
• See page 45 for adjusting the volume.
• Set the INPUT1/2/3/4 switch for the jack
connected to the microphone to MIC+48V.
Attaching the lens hood with lens
cover
PUSH (lens hood release) button
Align the marks on the lens hood to
those on the camcorder, and turn the
lens hood in the direction of the
arrow 2.
To remove the Lens hood with lens
cover
Turn the lens hood in the opposite direction
to the arrow 2 in the illustration while
pressing the PUSH (lens hood release)
button.
11
Continued ,