Hours Meter - Sony HVR-S270J Service Manual

Push the MENU/STATUS switch to MENU t select the
PUSH EXEC dial.
DATE REC
B OFF
Does not superimpose the date and time on
images.
ON
Superimposes the date and time on images.
z Tips
• When [DV WIDE REC] is set to [OFF], the date
and time are displayed outside the 4:3 area but
properly recorded on images.
• When you record in the HDV format, the date
and time are displayed at different positions
during recording and playback.
BEEP
B OFF
Cancels the melody.
ON
Activates a melody when you start/stop
recording.
REC LAMP[R] (Recording lamp
[rear])
When you set this function to [OFF], you
can turns off the rear camera recording
lamp during recording. The default setting
is [ON].
BATTERY TYPE
You can select the battery type to
accurately display the remaining power of
the battery installed.
B L SERIES
Select when using an L-series battery pack.
GL SERIES
Select when using a GL-series battery
pack.
ANTON/BAUER
Select when using an ANTON/BAUER
battery pack.
90
(OTHERS) with the SEL/

HOURS METER

You can display the cumulative operation
time of your camcorder with the total hours
of operation, drum rotation, tape running, or
the total number of tape unthreading
operations.
OPERATION
Displays the total hours of operation in 10-
hour increments.
DRUM RUN
Displays the total hours of drum rotation in
10-hour increments.
TAPE RUN
Displays the total hours of tape running in
10-hour increments.
THREADING
Displays the total number of tape
unthreading operation in 10-operation
increments.