Sony HVR-S270J Service Manual page 472

Cannot use
[SMTH SLW REC]
[MARKER]
[FOCUS MACRO]
[STEADYSHOT],
[FLANGE BACK]
[TC LINK]
[TC COUNTUP]
[UB-DATE/TC-TIME]
[WORLD TIME], [DATE
REC]
[x.v.Color]
[INTERVAL REC]
[DV FRAME REC]
[EXT REC CTRL]
Shutter speed, gain, white balance or iris cannot be adjusted manually.
• Set the CAMERA MODE switch to MANUAL.
Tiny spots in white, red, blue, or green appear on the screen.
• This phenomenon appears when using a slow shutter speed (p. 33). This is not a malfunction.
Situation
[REC TYPE] of [HDV PROGRE.] is set to [PROGRESSIVE].
[REC TYPE] of [HDV PROGRE.] is set to [INTERLACE] and
[SCAN TYPE] is set to [25].
[SCAN TYPE] of [DV PROGRE.] is set to [25].
[REC CTL MODE] of [EXT REC CTRL] is set to [EXT
ONLY].
The OUTPUT/DCC switch is set to BARS.
During [DATE REC]
A Carl Zeiss lens is mounted, and the focus ring is set to
mode B.
A Carl Zeiss lens is not mounted.
A Carl Zeiss lens is not mounted.
Your camcorder is not connected to an external device via an
i.LINK cable.
[TC MAKE] is set to [REGENERATE].
[TC MAKE] is set to [REGENERATE].
[TC RUN] is set to [REC RUN].
[UB TIME REC] is set to [ON].
Date and time are not set.
Date and time are not set.
[REC FORMAT] is set to [DV].
[REC CTL MODE] of [EXT REC CTRL] is set to [EXT
ONLY].
[REC TYPE] of [HDV PROGRE.] is set to [PROGRESSIVE].
[REC TYPE] of [HDV PROGRE.] is set to [INTERLACE] and
[SCAN TYPE] is set to [25].
[SCAN TYPE] of [DV PROGRE.] is set to [25].
[REC CTL MODE] of [EXT REC CTRL] is set to [EXT
ONLY].
During [SMTH SLW REC]
During [INTERVAL REC]
During [DV FRAME REC]
99
Continued ,