Sony HVR-S270J Service Manual page 372

25. Record of Use Check (2)
Page 7
Note 1: This data will not be erased (reset) when the lithium 3 V
power supply (SW-514 board BT6401) is removed.
Note 2: When the drum was replaced, initialize the drum rota-
tion counted time.
Note 3: Check that the data of page: 0, address: 10 is "00".
Address
90 Eject count with tape
91
92 (BCD code)
93 Eject count without
94 tape
95 (BCD code)
Using method:
1) The record of use data is displayed at page: 7, addresses: 90 to
95.
Initializing method:
Order Page Address Data
1 7 90
2 7 91
3 7 92
4 7 93
5 7 94
6 7 95
26. Record of Use Check (3)
Page 7
Note 1: This data will not be erased (reset) when the lithium 3 V
power supply (SW-514 board BT6401) is removed.
Note 2: Check that the data of page: 0, address 10 is "00".
Address
C8 User initial power
C9 on date
CA (BCD code)
CB Final condensation
CC occurrence date
CD (BCD code)
Using method:
1) The record of use data is displayed at page: 7, addresses: C8 to
CD.
HVR-S270J/S270U/S270N/S270E/S270P/S270C
Address 90 to 95
Function
Count (H) 100000th place digit and 10000th place digit of Eject count (decimal digit)
Count (M) 1000th place digit and 100th place digit of Eject count (decimal digit)
Count (L) 10th place digit and 1st place digit of Eject count (decimal digit)
Count (H) 100000th place digit and 10000th place digit of Eject count (decimal digit)
Count (M) 1000th place digit and 100th place digit of Eject count (decimal digit)
Count (L) 10th place digit and 1st place digit of Eject count (decimal digit)
Procedure
00 Press PAUSE (Write) button.
00 Press PAUSE (Write) button.
00 Press PAUSE (Write) button.
00 Press PAUSE (Write) button.
00 Press PAUSE (Write) button.
00 Press PAUSE (Write) button.
Address C8 to CD
Function
Year
Month After setting the clock, set the date of power on next
Day
Year
Month
Day
Remarks
Remarks
6-138