Using The Shot Transition - Sony HVR-S270J Service Manual

Using the Shot transition

You can store settings of focus, zoom, iris,
gain, shutter speed and white balance, and
smoothly shift from the current settings to
the stored settings (shot transition).
For example, you can shift the focus from
closer objects to farther objects, or change
the depth of field by adjusting the iris. You
can also develop scenes under different
conditions smoothly. If you store manually
adjusted settings of white balance, you can
smoothly shift from one scene to another
under different conditions, such as from
indoor to outdoor.
Sony recommends that you use a tripod to
avoid image blurring.
You can set the following items in [SHOT
TRANSITION] of the
SET) menu (p. 72).
Item Description and settings
TRANS TIME Setting of transition time
(the default setting is
[4.0sec])
You can set the transition
time by 0.5 sec between
[3.5sec] and [15.0sec], or
select from [20sec],
[30sec], [45sec] and
[60sec].
START TIMER Setting of timer to start
shot transition (the
default setting is [OFF])
You can select from
[5sec], [10sec] and
[20sec].
(CAMERA
b Notes
• You cannot manually adjust the focus, zoom,
• When [EXT REC CTRL] is set to [EXT
Item Description and settings
REC LINK Setting of transition
linked with start of
recording (the default
setting is [OFF])
[OFF]: Not to start
transition when the
recording is started.
[SHOT-A]: To start
transition to the SHOT-A
when the recording is
started.
[SHOT-B]: To start
transition to the SHOT-B
when the recording is
started.
FOCUS TRANS Setting ([ON]/[OFF]) of
focus transition (the
default setting is [ON])
ZOOM TRANS Setting ([ON]/[OFF]) of
zoom transition (the
default setting is [ON])
IRIS TRANS Setting ([ON]/[OFF]) of
iris transition (the default
setting is [ON])
iris, gain, shutter speed and white balance while
the CHECK or EXEC lamp is on. You can
manually adjust the focus, zoom and iris, even
the CHECK or EXEC lamp is on when you set
[FOCUS TRANS], [ZOOM TRANS] and [IRIS
TRANS] to [OFF], respectively.
ONLY], setting [REC LINK] (linked recording)
to [SHOT-A] or [SHOT-B] links the start of
transition to the start of recording on an external
device (HVR-MRC1 or HVR-DR60).
51
Continued ,