Recording An Index Signal - Sony HVR-S270J Service Manual

4
Select the ASSIGN button to
which you want to assign a
function with the SEL/PUSH
EXEC dial A.
• You can select the ASSIGN 1 through 6
buttons on the body and the L1, L2 and RET
button on the lens.
• [------] appears if no function is assigned to
the ASSIGN button.
5
Select the function that you want
to assign with the SEL/PUSH
EXEC dial A.
6
Select [OK] with the SEL/PUSH
EXEC dial A.
7
Select [RETURN] with the SEL/
PUSH EXEC dial A.
8
Push the MENU/STATUS switch
B to MENU to hide the menu
screen.

Recording an index signal

When you record a scene with an index
signal, you can easily find the scene during
playback on a device that supports this
function.
The index function will make it easier to
check the transition of recording or edit
your pictures using index signals.
1
Assign [INDEX MARK] to one of
the ASSIGN buttons (p. 48).
2
Press the ASSIGN button to
which [INDEX MARK] is assigned.
During recording
appears for about 7 seconds and an
index signal is recorded.
During standby
flashes.
After you press the REC START/STOP
button to start recording,
for about 7 seconds and an index signal
is recorded.
To cancel the operation
Press the ASSIGN button to which [INDEX
MARK] is assigned again before you start
recording.
b Notes
• You cannot record an index signal on a recorded
tape afterward.
appears
49
Continued ,