Shot Transition - Sony PMW-EX1R Operating Instructions Manual

• If the recorded picture and the current camera
picture differ in video format, the Freeze Mix
display cannot be achieved.
• The Freeze Mix function cannot be used if the
recording video format is SP 1440/24P.
• The Freeze Mix display cannot be obtained in
Slow & Quick Motion mode or Slow Shutter
mode.
• You cannot operate the Setup menus and
PICTURE PROFILE menu in Freeze Mix
status.

Shot Transition

The Shot Transition function helps you to easily
obtain complex picture effects by registering
camera settings or conditions as a "shot" to be
reproduced in a recording sequence.
Your settings for focus, zoom, iris, gain, shutter
speed, white balance, color matrix, and detail
level can be registered in combination in one shot,
and you can change the current camera settings to
those of the shot, or the settings reproduced from
one shot to those of another Shot, resulting in a
smooth transition of scenes.
For example, you can shift the focus from a closer
object to a farther object, or change the depth of
field by adjusting the iris. In addition, you can
develop scenes under different recording
conditions smoothly. If you register the manual
adjustment function for white balance, the scenes
will develop smoothly between objects indoors
and those outdoors.
Notes
• Shot transition cannot be activated in
combination with any of the EX Slow Shutter,
Interval Recording, Frame Recording, and Slow
& Quick Motion functions.
• If you wish to shift the focus in a shot transition,
set the focus adjustment mode to MF or AF (see
page 56). The focus will not be shifted if Full
MF mode is selected.
• If you wish to shift the zoom in a shot transition,
set the ZOOM switch to SERVO (see page 54).
The zoom will not be shifted with the
MANUAL setting.
• If you register a focus position in a macro area
with the MACRO switch ON, the focus may not
be shifted to the registered position if a shot
transition is executed with the MACRO switch
set to OFF.
Shot-transition operation buttons and
indications
For shot-transition operations, use the three
TRANSITION operation buttons on the upper
panel.
Shot Transition 77