Recording An Index Signal At The Beginning Of Recording - Sony Handycam HDR-FX1 Operating Instructions Manual

2 Press RE(" START/STOP.
The FADER indicator stops flashing and
disappears when the fade is complete.
To cancel the operation
Press the ASSIGN button assigned to the
FADER function repeatedly until the FADER
indicators disappear.
0 Note
• You cannot use the FADER fimcfion together with
[FRAME REC] (Fiatne recording). DV
If you make an index for a scene, you can
easily search for the scene later (p. 50).
The index function will make it easier to
check the transition of recording or edit your
pictures using index signals.
Assign the index flmction to one of the
ASSIGN" buttons in advance. See page 68 to
assign a function.
Press the ASSIGN button assigned to the
index function.
When pressed during recording
[] appears for about 7 seconds and an index
signal is recorded.
When pressed in the standby mode
[] flashes.
After you press RE(? START/STOP to start
recording, [] appears for about 7 seconds and
an index signal is recorded.
To cancel the operation
Before starting to record, press the ASSIGN
button assigned to the index function again.
O Note
• You cannot recoid an index signal on a iecorded tape
af_eiwaid
m
;o
o
ASSIGN
REC START/STOP
Recording 39