Functions; Presets - NuWave Nutri-Po 13Q Owner's Manual

Preheating: While the unit reaches the appropriate temperature for the function selected, the display
will show "PH" indicating that it is preheating. Once the unit reaches the appropriate pressure, it will
shift from preheating to the selected preset cooking time. Once pressure has built inside the pressure
cooker, the PH display will change to P, followed by the amount of time it will remain under pressure.
Pressure: The function selected will determine the amount of pressure time. In this example, the
display will show "P0:10" (pressure time). The colon or ":" will flash to indicate that the pressure
cooker is under pressure and the timer is counting down.
Auto Warm Feature: When cooking is complete, the pressure cooker automatically switches to the
warm function. Default warm time changes depending on the Preset used.

Presets

Rice
Multi Grain
Soup
Meat/Stew
Poultry
Beans
Fish
Steam/Veggies
Potatoes
Bake
Canning
Warm (Function)
delay
Time (Function)
less normal
hours
minutes
Texture:
This is a function to help change the consistency of your foods.
"less", "normal," and "more" are selected guides that increase or decrease
the cooking time while under pressure.
time texture
delay
Directions:
Press a desired preset button. The display will default to "normal" time.
1
(Ex: Press "rice" and the display will show 00:10).
To change the consistency of the food (less, normal, more), simply press "texture". The
2
appropriate light will display, indicating that the time has been changed. The time in the display
will automatically adjust accordingly. (Ex: For the "rice" function, "less" is 7 minutes, "normal"
is 10 minutes and "more" is 21 minutes).
3
Close the Lid and press the "start/stop" button.
16
Owner's Manual
PRESETS (Continued)
Auto Warm Feature
Indefinitely
manual
more

FUNCTIONS

slow
warm sear
cook
Auto Shutoff
start/stop
sh
steam/
veggies
potatoes
bake
canning
Time
Hours: Minutes
04:00
02:00
01:00
04:00
01:00
04:00
04:00