X9DRD-iF/LF Motherboard User's Manual
Management Engine (ME) Recovery
Management Engine (ME) Recovery
Use Jumper JPME1 to select ME Firm-
Use Jumper JPME1 to select ME Firm-
ware Recovery mode, which will limit
ware Recovery mode, which will limit
resource allocation for essential system
resource allocation for essential system
operation only in order to maintain nor-
operation only in order to maintain nor-
mal power operation and management.
mal power operation and management.
In the single operation mode, online
In the single operation mode, online
upgrade will be available via Recovery
upgrade will be available via Recovery
mode. See the table on the right for
mode. See the table on the right for
jumper settings.
jumper settings.
Manufacture Mode Select (X9DRD-iF)
Close Pin 2 and Pin 3 of Jumper JPME2
to bypass SPI flash security and force
the system to operate in the Manufac-
ture Mode, allowing the user to flash the
system firmware from a host server for
system setting modifications. See the
table on the right for jumper settings.
COM2
JUIDB
BMC CTRL
BMC
LAN CTRL
PCH
B
A
BIOS
C1
D1
CPU1
FAN4
JVR1
USB2/3
VGA
LAN1
FAN8
FAN7
LAN2
JPG1
LAN
JPB1
CTRL
CLK CTRL
JI2C1
JI2C2
X9DRD-iF
Rev.
1.10
G1
H1
JBT1
B1
A1
JPW5
2-38
Jumper Settings
Jumper Setting
1-2
2-3
ME Mode Select
Jumper Settings
Jumper Setting
1-2
2-3
USB0/1
COM1
USB6
IPMI_LAN
SP1
JPW4
F1
E1
CPU2
JBAT1
JOH1
:OH LED
LED2
ME Recovery
Definition
Normal (Default)
ME Recovery
Definition
Normal (Default)
Manufacture Mode
JPME1
A.
B. JPME2 (X9DRD-iF)