Table of Contents
Advertisement
X9DRW-CF31/X9DRW-CTF31 Motherboard User's Manual
Redirection After BIOS Post
Use this feature to enable or disable Legacy Console Redirection after BIOS
POST. When this feature is set to Bootloader, Legacy Console Redirection is
disabled before the OS is initialized. When this feature is set to Always Enable,
Legacy Console Redirection remains enabled during OS bootup. The options
are Always Enable and Bootloader.
Serial Port for Out-of-Band Management/Windows Emergency
Management Services (EMS)
The submenu allows the user to configure Console Redirection settings to
support Out-of-Band Serial Port management. The options are Enabled and
Disabled.
Console Redirection Settings
The feature allows the user to configure Console Redirection settings for a local
machine to communicate with a remote server.
Console Redirection Settings (for EMS)
Use this feature to specify how the host computer will exchange data with the
client computer, which is the remote computer used by the user.
Out-of-Band Management Port
The feature selects a serial port used by the Microsoft Windows Emergency
Management Services (EMS) to communicate with a remote server. The options
are COM and SOL.
Terminal Type
This feature allows the user to select the target terminal emulation type for Con-
sole Redirection. Select VT100 to use the ASCII character set. Select VT100+
to add color and function key support. Select ANSI to use the extended ASCII
character set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters
into one or more bytes. The options are ANSI, VT100, VT100+, and VT-UTF8.
Bits Per Second
This item sets the transmission speed for a serial port used in Console Redirec-
tion. Make sure that the same speed is used in the host computer and the client
computer. A lower transmission speed may be required for long and busy lines.
The options are 9600, 19200, 57600, and 115200 (bits per second).
Flow Control
This feature allows the user to set the flow control for Console Redirection to
prevent data loss caused by buffer overflow. Send a "Stop" signal to stop send-
4-20
Advertisement
Table of Contents
