Management Engine (Me) Recovery; Manufacture Mode Select - Supermicro X9DRW-3F User Manual

Management Engine (ME) Recovery

Use Jumper JPME1 to select ME Firm-
ware Recovery mode, which will limit
resource allocation for essential system
operation only in order to maintain nor-
mal power operation and management.
In the single operation mode, online
upgrade will be available via Recovery
mode. See the table on the right for
jumper settings.

Manufacture Mode Select

Close pins 2 and 3 of Jumper JPME2 to
bypass SPI flash security and force the
system to operate in the Manufacture
Mode, allowing the user to flash the
system firmware from a host server for
system setting modifications. See the
table on the right for jumper settings.
COM2
BMC
CTRL
JI2C1
JVRM_I2C1
JPG1
BIOS
JVRM_I2C2
B
JBT1 PCH
A
JBAT1
SATA/ SCU0~3
SATA/SCU4~7
JF1
JD1
1
JSM1
JSM2
JL1
VGA
UID
JUIDB
LAN
CTRL
LAN1
LAN2 USB2/3
CPU2
CLOSE 1st
OPEN 1st
X9DRW-3F/iF
Rev.1.02
CPU1
CLOSE 1st
OPEN 1st
JVR1
FAN3
2-39
ME Recovery
Jumper Settings
Jumper Setting
1-2 Normal (Default)
2-3 ME Recovery
ME Mode Select
Jumper Settings
Jumper Setting
1-2 Normal (Default)
2-3 Manufacture Mode
A.
COM1
USB0/1
B. JPME2
PHY
IPMI-LAN JPW4
JPW3
SP1
JPW2
FAN1
Chapter 2: Installation
Definition
Definition
JPME1