Vga Enable; Bmc Enable - Supermicro X9DRW-CF31 User Manual

X9DRW-CF31/X9DRW-CTF31 Motherboard User's Manual

VGA Enable

Jumper JPG1 allows the user to enable
the onboard VGA connector. The default
setting is 1-2 to enable the connection.
See the table on the right for jumper
settings.

BMC Enable

Jumper JPB1 allows you to enable the
embedded the Nuvoton WPCM450 BMC
(Baseboard Management) controller to
provide IPMI 2.0/KVM support on the
motherboard. See the table on the right
for jumper settings.
A B
BMC
JSD1
JBT1
BIOS
Intel
PCH
LAN1 USB2/3 USB0/1
LAN2
UID LED3
LAN
i350 (-CF31)
X540 (-CTF31)
CLOSE 1st
CPU2
JBAT1
BAR CODE
CLOSE 1st
CPU1
OPEN 1st
2-38
VGA Enable
Jumper Settings
Jumper Setting Definition
1-2 Enabled (Default)
2-3 Disabled
BMC Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2 BMC Enable
Pins 2-3 Normal (Default)
VGA
COM1
IPMI_LAN
OPEN 1st
X9DRW-CF31
Rev. 1.01
FAN1
VGA Enabled
A.
BMC Enabled
B.