Management Engine (Me) Recovery; Manufacturer Mode Select - Supermicro Supero X9DRi-LN4F+ User Manual

Management Engine (ME) Recovery

Management Engine (ME) Recovery
Use Jumper JPME1 to select ME Firm- Use Jumper JPME1 to select ME Firm-
ware Recovery mode, which will limit ware Recovery mode, which will limit
resource allocation for essential system resource allocation for essential system
operation only in order to maintain nor- operation only in order to maintain nor-
mal power operation and management. mal power operation and management.
In the single operation mode, online In the single operation mode, online
upgrade will be available via Recovery upgrade will be available via Recovery
mode. See the table on the right for mode. See the table on the right for
jumper settings. jumper settings.

Manufacturer Mode Select

Close pins 2 and 3 of Jumper JPME2 to
bypass SPI flash security and force the
system to operate in the Manufacturer
mode, allowing the user to flash the sys-
tem firmware from a host server for sys-
tem setting modifications. See the table
on the right for jumper settings.
LEM1
JP7
JP6
JI2C2
JI2C1
XDP-CPU
B
A
JWP1
J18
JF2
SAS4~7 SAS0~3
J17
JD1
1
1
USB 2/3 USB 0/1
LAN2/4 LAN1/3
VGA
LE2
SW1
UID
IPMI_LAN
CPU2
X9DR3-LN4F+/X9DRi-LN4F+
Rev. 1.10
CPU1
LE1
JF1
2-37
Chapter 2: Installation
ME Recovery
Jumper Settings
Jumper Setting
1-2 Normal (Default)
2-3 ME Recovery
ME Mode Select
Jumper Settings
Jumper Setting
1-2 Normal (Default)
2-3 Manufacture Mode
COM1
FAN1
Definition
Definition
A. JPME1
B. JPME2