Removing Memory Modules - Supermicro X9DRW-CF31 User Manual

X9DRW-CF31/X9DRW-CTF31 Motherboard User's Manual
6. Press the release tabs to the locked positions to secure the DIMM module
into the slot.
Notes:
1. For proper memory installation, be sure to install a DIMM module into
the P2-DIMMG1 slot before inserting a 4-pin power connector into JPW4
as shown in the graphics below.
2. To provide clearance for proper memory installation, please lock the
release tab at the end of P1-DIMMA1, marked "A", into the locking posi-
tion before inserting a DIMM module into the P2-DIMMH2 slot. Also, lock
the tab, marked "B", before installing a DIMM module into P1-DIMMA1.
Notches
Release Tabs

Removing Memory Modules

Press both notches on the ends of the DIMM module to unlock it. Once it is loos-
ened, remove it from the memory slot.
2-10
Press both notches
straight down into the
memory slot at the
same time.