Mitsubishi SCM40ZS-S Technical Manual page 322

3. Installtion Points
3. Installation Points
(1) Stick the insulation on both inner sides of the duct, leaving no space up and down.
BOTTOM
TOP
Duct
(*) After unpacking, bottom side of the unit is located at the upper side.
(2) Install the rail on both inner sides of the duct with the screw.
Screw
(3) Install the air filter on the rails.
(4) Install the bracket on the rail with the screw.
Insulation
Insu lation
Rail
Air filter
Screw
Bracket
321
- -
'16 • SCM-T-199
(Unit inside)
Insulation
Sticking standard position
Duct
(Unit outside)
②
①
Installation procesure
(**) When the unit is installed,
bottom side of the unit is
located at the lower side.
for insulation
③
PJZ012D076