Advertisement
2-6.
End of application
Press the [X] button at the upper right to end the application
program.
2-7.
Turning off the power of Rio3224-D
1)
Set the DIP switch to the normal mode.
All off
2)
Turn off the power switch of Rio3224-D.
2-9.
List of errors and warnings
Error No.
[ERROR:001]
[ERROR:002]
[ERROR:003]
[ERROR:004]
[ERROR:005]
[ERROR:006]
[ERROR:009]
［ ERROR:301 ］
［ ERROR:302 ］
［ ERROR:303 ］
［ ERROR:304 ］
［ ERROR:305 ］
［ ERROR:306 ］
Command transmission was failed.
(Securement of communication pathway)
Command transmission failed (to secure communication passage).
Command transmission was failed.
(Acquisition of communication control authority)
Command transmission failed (to obtain communication control right).
Command transmission was failed.
(Control authority open)
Command transmission failed (to open control right).
Command transmission was failed.
(Disconnection of communication pathway)
Command transmission failed (to cut off communication passage).
Communication pathway couldn't be secured.
Securing communication passage failed.
Control authority couldn't be obtained.
Obtaining control right failed.
not an update mode.
Update mode is not selected.
Command transmission was failed.(Writing of serial number)
Transmission of serial number writing command failed.
Command transmission was failed.(Reading of serial number)
Transmission of serial number reading command failed.
Writing of serial number was failed.
Writing of serial number failed.
Reading of serial number was failed.
Reading of serial number failed.
Please input with adding "21" to the top.
Add "21" at the forefront position.
Wrong serial.
The written serial number is wrong.
2-8.
In case of updating failed
If an error occurs during writing or writing is not finished
after a long time, end the application once, restart Rio3224-D
and perform the serial number writing procedure from the
beginning again.
Description
Rio3224-D
89
Hide quick links:
Advertisement
Chapters
