Yamaha RIO3224-D Service Manual page 53

2-3. LED Test
Contents: Checks if the POWER LED lights up.
Checks if the LEDs light up in order from left.
Checks if all red LEDs light up.
Checks if all green LEDs light up.
Checks if all orange LEDs light up.
Checks if all LEDs light up.
Precautions
The test result should be judged by the inspector. For proper
operation, follow instructions indicated in the dialog box.
For the LED Rotation test, input the judgment result after the
test is fi nished (IN RX is off).
(Example of screen)
OUTPUT result
• Normal condition
The result is displayed in the OUTPUT window as follows.
Item
POWER LED OK: POWER LED
LED Rotation OK: LED Rotation
LED All Red OK: LED All Red
LED All Green OK: LED All Green
LED All Orange OK: LED All Orange
LED All OK: LED All
• In case of failure
The result is displayed in the OUTPUT window as follows.
Item
POWER LED NG: POWER LED
LED Rotation NG: LED Rotation
LED All Red NG: LED All Red
LED All Green NG: LED All Green
LED All Orange NG: LED All Orange
LED All NG: LED All
Text indication
Text indication
2-4. ETHERNET Test
Contents: Checks the Dante Ethernet (Primary/Secondary) port
and rear LED.
Precautions
As the inspector must connect and disconnect the cable to
and from the Secondary port, be sure to follow instructions
indicated in the dialog box.
When a message as shown below appears, disconnect the cable
from the secondary port, check the condition of rear LED and
input the check result.
When a message as shown below appears, connect the cable to
the secondary port as in the original state.
(Example of screen)
OUTPUT result
• Normal condition
The result is displayed in the OUTPUT window as follows.
Item
RJ45/REAR LED OK: RJ45/REAR LED
WIRING OK: WIRING
• In case of failure
The result is displayed in the OUTPUT window as follows.
Item
RJ45/REAR LED NG: RJ45/REAR LED
WIRING NG: WIRING
Rio3224-D
Text indication
Text indication
53