Yamaha RIO3224-D Service Manual page 58

Rio3224-D
Item
AES/EBU 96kHz NG: AES/EBU 96kHz
AES/EBU 100kHz NG: AES/EBU VARIPITCH HI
AES/EBU 42.336kHz NG: AES/EBU VARIPITCH LO
3. Starting in THROUGH mode (for Testing)
Start in the order of INPUT 1–8, 17–24ch → OUTPUT 1–16ch
through mode or INPUT 9–1, 25–326ch → OUTPUT 1–16ch
through mode.
INPUT 1–8, 17–24ch → OUTPUT 1–16ch through
3-1.
mode
Starting method to OUTPUT signals of analog input (1–8,
17–24ch) to analog OUTPUT (1–16ch)
1) Set the DIP switch to the DIAG mode.
No.7 and 8 on, others off.
2) Set the UNIT ID switch to 7.
3) Turn on the power switch of Rio3224-D.
INPUT 9–16, 25–32ch → OUTPUT 1–16ch
3-2.
through mode
Starting method to OUTPUT analog input (9–16, 25–32ch)
signals to analog OUTPUT (1–16ch)
1) Set the DIP switch to the DIAG mode.
No.7, 8 on, others off
2) Set the UNIT ID switch to 8.
3) Turn on the Power switch of Rio3224-D.
3-3. Power of Rio3224-D Off
1) Set the DIP switch to the normal mode.
All off
2) Turn off the power switch of Rio 3224-D.
58
Text indication 3-4. Head amplifi er parameter
Settings of the head amplifi er in the THROUGH mode are fi xed
as follows.
Parameter name
+48V
HPF
HPF Freq
Gain
Setting value
OFF
OFF
(80Hz)
+10dB