Yamaha RIO3224-D Service Manual page 51

1-8. Test procedure
(Test executing screen)
3. Use this to start testing.
1. Check that [Rio3224-D-Service] is selected in the tree window.
* If it is not selected, select [Rio3224-D-Service].
2. Check that all items to be checked are marked with check marks in the list window.
* To mark all items to be checked with check marks, click the [ALL ON] button in the tool bar.
* To limit the test items, mark only desired items to be checked with check marks.
3. Start the test in one of the following ways.
• Click [Start] in the Tool bar.
• Click [START] in the Function key.
• Press [F1] on the keyboard.
• Click [Test] – [Start] in the Menu bar.
1-9. How to set up DIP switch after testing
1. Set the DIP switches in the normal mode.
All off
2. Turn off the power switch of Rio3224-D.
2. Put check marks in all checkboxes.
3. Use this to
start testing.
1. Select
[Rio3224-D-Service].
2. Put check marks in all checkboxes.
2. Put check marks for detailed test items as well.
Rio3224-D
51