Advertisement
Rio3224-D
■ PROCEDURE TO WRITE THE SERIAL NUMBER
1. 1. Preparation
1-1.
Required items
• Rio3224-D
• Ethernet (CAT5e) straight cable: 1 pc.
• PC: 1 unit, Windows XP with Ethernet port Windows
Vista or Windows 7
1-2.
Network setting
Use the same network setting as for Test Program. (See p. 47)
1-3.
Application
Download Rio3224-D Test Program Data Package from YSISS
website and copy it right under the C drive.
• ¥Rio3224-D¥tools¥serbar2¥serbar2.exe
1-4.
Connection
Connect the PC and Primary port of Rio3224-D with Ethernet
(CAT5e) straight cable.
* Only the above connection is required. Do not connect
anything to other terminals.
2. Updating procedure
2-1.
Settings and starting of DIP switch
1)
Set the DIP switch to the update mode.
No.8 on, others off
2)
Turn on the power switch of Rio3224-D.
3)
Check that all of +48V indicators fl ash, which means that
DIP switch has been activated in the update mode.
If all of +48V indicators do not flash, +48V LED
peripheral circuit may be faulty.
88
PC
Rio3224-D
2-2.
Starting the application program
When "serbar2.exe" is activated, the screen appears as shown
below.
2-3.
Entering the serial number
Make sure that there is nothing written after "bar-code input:".
* If there is, click on "clear".
2-4.
Starting to write the serial number
Using the keyboard, write "21" fi rst and then the serial number
of the main unit of Rio and click on "writing".
2-5.
End of entering the serial number
When writing the serial number is completed, "serial" appears,
followed by "Writing of serial number was completed."
Hide quick links:
Advertisement
Chapters
