Yamaha RIO3224-D Service Manual page 84

Rio3224-D
■ UPDATING DANTE MODULE (Brooklyn2)
1. Preparation
1-1. Required items
• Rio3224-D
• Ethernet (CAT5e) straight cable: 1 pc.
• PC: 1 unit, Windows XP with Ethernet port Windows
Vista or Windows 7
1-2. Network setting
Use the same network setting as for Test Program. (See p. 47)
1-3. Application
Download Rio3224-D Test Program Data Package from YSISS
website and copy it right under the C drive.
When "DanteFirmwareUpdateManager-•••.msi" is executed,
the updata will be installed. (••• represents version No.)
* Premise: Bonjour is installed and operates properly.
* If the version of the fi rmware is different, update it to
the latest version.
1-4. Connection
Connect the PC and primary port of Rio3224-D with Ethernet
(CAT5e) straight cable.
* Only the above connection is required and nothing
should be connected to any other terminal.
84
PC
Rio3224-D
2. Updating procedure
2-1. Settings and starting of DIP switch
• Update mode
1) Set the DIP switch to the update mode.
No.8 on, others off
2) Turn on the power switch of Rio3224-D.
3) Check that all of +48V indicators fl ash, which means that
DIP switch has been activated in the update mode.
If all of +48V indicators do not flash, +48V LED
peripheral circuit may be damaged.
2-2. Starting application
Using Firmware Update Manager provided by Audinate,
execute updating Dante firmware. (Start in the order of Start
menu – Program – Audinate – Dnte Firmware Update Manager
– Dante Firmware Update Manager.)
The screen immediately after startup appears as shown below.
Start updating by pressing the [Update Dante Firmware]
button.