Ubiquiti AMPLIFI User Manual page 33

AmpliFi User Guide
Signal Quality
Signal Strength
• Displays the percentage of signal
strength.
MeshPoint Band
• Displays the radio band used by the
MeshPoint. Select 2.4 GHz or 5 GHz. The default is 5 GHz.
General
Device Name
• Displays the descriptive name of the
MeshPoint. Tap to change it.
• System Sound Enabled by default. Tap the toggle switch
to turn off sound alerts from the MeshPoint.
LED
• Enabled by default. Tap the toggle switch to turn off
the LEDs on the MeshPoint.
Pause Mesh Point
• Tap the toggle switch to pause the
MeshPoint.
• About Select this option for more information about the
MeshPoint.
General
•
Model Name Displays the model of the MeshPoint.
-
Hardware ID Displays the revision number of the
-
MeshPoint hardware.
Software
•
Version
Displays the version number of the MeshPoint
-
software.
Revision Displays the revision number of the
-
MeshPoint software.
• MAC Addresses
Wi-Fi 2.4 GHz Displays the MAC address of the 2.4 GHz
-
wireless interface.
Wi-Fi 5 GHz
Displays the MAC address of the 5 GHz
-
wireless interface.
Guest Wi-Fi 2.4 GHz
-
guest 2.4 GHz wireless interface.
Guest Wi-Fi 5 GHz
Displays the MAC address of the
-
guest 5 GHz wireless interface.
Bluetooth
Displays the MAC address of the Bluetooth
-
interface.
Actions
Locate
• The MeshPoint emits a sound beacon for several
seconds.
• Reboot Restarts the MeshPoint.
• Support Info The Support Info option generates an
encrypted file to send to our support team. This file
contains AmpliFi configuration and runtime information
that can be used to answer any questions or troubleshoot
an issue.
Note: No passwords are stored in the file.
To generate the file, tap Proceed. To ignore creating the
support file, tap Cancel.
Chapter 6: System
Displays the MAC address of the
29