Product Overview; Meshpoint - Ubiquiti AMPLIFI User Manual

Chapter 1: Getting Started

Product Overview

Router Front
The front of the AmpliFi Router features an
adjustable, full-color touchscreen display.
The bottom of the AmpliFi Router features an
adjustable LED that is fully lit by default when the
Router is configured and ready for use.
Note: The brightness settings of the touchscreen
and LED are configurable using the AmpliFi app.
Router Back
1
3
1-4
Four Gigabit Ethernet ports available to
connect 10/100/1000 Mbps wired network
devices to the Internet.
Connects to the broadband modem provided
by your ISP (Internet Service Provider).
Reserved for future use.
The Power Adapter connects to this port.
2
2
4

MeshPoint

LED States
Ready to Add
The three middle LEDs will continually
flash on and off indicating a MeshPoint
is ready for configuration.
Booting Up
Once configured, the LEDs will indicate
the device is booting up with a looping
motion of the LEDs lighting up from
bottom to top.
Searching for Network
The LEDs will indicate the MeshPoint is
searching for the network by lighting
up from the middle outwards.
Connected
Once the MeshPoint is connected, the
LEDs will represent the signal strength.
AmpliFi User Guide
Adjustable Antenna
Signal LEDs
Magnetic Connector
MeshPoint Base