Connection Type - Ubiquiti AMPLIFI User Manual

Chapter 4: Installing Without the App

Connection Type

1. Click the Connection Type drop-down menu and select
DHCP, Static, or PPPoE.
2. Proceed to the section in this chapter that corresponds
with your Connection Type.
DHCP
DHCP (Dynamic Host Configuration Protocol) automatically
configures your AmpliFi Router.
1. Click Save & Continue.
The AmpliFi Router will emit a sound indicating that it has
been configured.
192.168.124.1
Configuration is complete.
14
WAN IP
10.0.2.192
ROUTER IP
1
Static
The Static option allows you to manually enter information
given to you by your Internet Service Provider (ISP).
1. Enter the appropriate information into each of the
corresponding fields.
IP Address
• Enter the Internet IP address of the Router.
• Network Mask Enter the network or subnet mask of the
Router.
Gateway Address
• Enter the WAN IP address of the
service provider's gateway router.
• Primary DNS Enter the IP address of the service
provider's primary DNS server.
Secondary DNS
• Enter the IP address of the service
provider's secondary DNS server.
2. Click Save & Continue.
The AmpliFi Router will emit a sound indicating that it has
been configured.
192.168.124.1
Configuration is complete.
AmpliFi User Guide
WAN IP
10.0.2.192
ROUTER IP
1