Installing The Meshpoints - Ubiquiti AMPLIFI User Manual

Chapter 2: Hardware Install

Installing the MeshPoints

Note: MeshPoint installation is optional and may not
be necessary in smaller homes.
1. Plug the MeshPoint into a power outlet.
2. After approximately one minute, the LEDs will reflect
signal strength, illuminating upward once the MeshPoint
is connected to the Router.
4
3. The MeshPoint antenna can be adjusted to provide
optimal signal coverage for your location.
Note: If a MeshPoint is powered on and has been
configured with the app but does not appear online,
try relocating the MeshPoint closer to the Router.
AmpliFi User Guide