Port Forwarding - Ubiquiti AMPLIFI User Manual

AmpliFi User Guide
Name Enter a descriptive name for the device that will
-
be assigned a static IP address.
MAC Address
Enter the MAC address of the device.
-
IP Address
Select the IP address you want to assign.
-
Tap to save your changes.

Port Forwarding

Tap this option to create a virtual port that allows you to
forward traffic from one port to another. Typically you
configure a port forwarding rule so a host on the external
network can access a server on the internal network by
using the public IP address (or hostname) of the Router.
To create a port forwarding rule, tap +.
Name
Enter a descriptive name for this rule.
-
IP Address Enter the LAN IP address that will receive
-
the forwarded port traffic.
Source Port
Enter the port or ports that will be
-
forwarded to the LAN. You can identify the port or ports
by name, number, and/or range. To specify multiple
ports, use a comma-separated list.
Example: https,20-23,554
Dest. Port
Enter the port or ports that will receive the
-
forwarded port traffic. You can identify the port or ports
by name, number, and/or range. If you do not specify
this port, then the original destination port of the traffic
will be used.
Protocol Select the appropriate protocol: TCP, UDP, or
-
TCP & UDP.
Tap to save your changes.
Chapter 6: System
25