Ubiquiti AMPLIFI User Manual page 28

Chapter 6: System
Address
The range of available IP addresses is displayed. The DHCP
server assigns IP addresses from the pool (or group) of IP
addresses.
DHCP Settings
Range
• The current range is displayed. Select the range
you want to use.
Subnet
• The current subnet is displayed. Select the subnet
you want to use.
• Start The current starting IP address of the range is
displayed. Select the starting IP address you want to use.
End
• The current ending IP address of the range is
displayed. Select the ending IP address you want to use.
• Lease Validity The IP addresses assigned by the DHCP
server are valid only for the duration specified by the lease
time. Increasing the time ensures client operation without
interruption, but could introduce potential conflicts.
Decreasing the lease time avoids potential address
conflicts, but could lead to minor interruptions for the
client while it acquires a new IP address from the DHCP
server. Select the appropriate option: 1 hour, 2 hours,
4 hours, 8 hours, 12 hours, 1 day, 1 week, or 1 month
(30 days), or 1 year (365 days).
Tap to save your changes.
24
Static Leases
• Select this option to display a list of static IP
addresses assigned to specific devices.
To map a static IP address to a specific MAC address, tap +.
AmpliFi User Guide