Ubiquiti NBE-5AC-Gen2 Quick Start Manual
  1. Manuals
  2. Brands
  3. Ubiquiti Manuals
  4. Wireless Router
  5. NBE-5AC-Gen2
  6. Quick start manual

Ubiquiti NBE-5AC-Gen2 Quick Start Manual

Hide thumbs Also See for NBE-5AC-Gen2:
Table of Contents

Advertisement

Quick Links

See also: Quick Start Manual
19/08/2019
Package Contents
NanoBeam 5AC Gen 2
Metal Strap
Installation Requirements
Pole-mounting: 7 mm socket wrench or screwdriver
Wall-mounting: wall fastener (not included)
Shielded Category 5 (or above) cabling with drain wire should be used for all wired
Ethernet connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from
Ubiquiti. For more details, visit
Surge protection should be used for all outdoor installations. We recommend that
you use two Ethernet Surge Protectors, model ETH-SP, one near the NanoBeam and
the other at the entry point to the building. The ETH-SP will absorb power surges and
safely discharge them into the ground.
https://dl.ubnt.com/qsg/NBE-5AC-Gen2/NBE-5AC-Gen2_EN.html
NBE-5AC-Gen2 Quick Start Guide
NBE-5AC-Gen2 Quick Start Guide
Ball Joint Mount
Gigabit PoE (24V, 0.5A) with
Mounting Bracket
ui.com/toughcable
Lock Ring
Power Cord
1/18

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NBE-5AC-Gen2 and is the answer not in the manual?

Questions and answers

Related Manuals for Ubiquiti NBE-5AC-Gen2

Summary of Contents for Ubiquiti NBE-5AC-Gen2

  • Page 1 19/08/2019 NBE-5AC-Gen2 Quick Start Guide NBE-5AC-Gen2 Quick Start Guide Package Contents NanoBeam 5AC Gen 2 Ball Joint Mount Lock Ring Metal Strap Gigabit PoE (24V, 0.5A) with Power Cord Mounting Bracket Installation Requirements Pole-mounting: 7 mm socket wrench or screwdriver...

  • Page 2: Hardware Overview

    19/08/2019 NBE-5AC-Gen2 Quick Start Guide NBE-5AC-Gen2 Quick Start Guide Hardware Overview https://dl.ubnt.com/qsg/NBE-5AC-Gen2/NBE-5AC-Gen2_EN.html 2/18...
  • Page 3 19/08/2019 NBE-5AC-Gen2 Quick Start Guide NBE-5AC-Gen2 Quick Start Guide Main Ethernet Port This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the device is powered on.

  • Page 4: Hardware Installation

    19/08/2019 NBE-5AC-Gen2 Quick Start Guide wireless signal strength is equal to or greater than the LED’s threshold value. The NBE-5AC-Gen2 Quick Start Guide default threshold values for these LEDs are shown below: Hardware Installation “Wall Mounting”. Go to the appropriate mounting instructions: Pole Mounting or Pole Mounting https://dl.ubnt.com/qsg/NBE-5AC-Gen2/NBE-5AC-Gen2_EN.html...

  • Page 5: Wall Mounting

    19/08/2019 NBE-5AC-Gen2 Quick Start Guide NBE-5AC-Gen2 Quick Start Guide Wall Mounting The NanoBeam must be mounted directly to a wood stud or other structurally stable surface to avoid damage to the mounting hole when you adjust the aim. Optional Accessory To enhance stability, you can use the NanoBeam Wall Mount Kit, model NBE-WMK (sold separately).

  • Page 6: Installation Instructions

    19/08/2019 NBE-5AC-Gen2 Quick Start Guide Note: Center screw included. Two optional screws (not included) provide NBE-5AC-Gen2 Quick Start Guide additional stability. Installation Instructions https://dl.ubnt.com/qsg/NBE-5AC-Gen2/NBE-5AC-Gen2_EN.html 6/18...
  • Page 7 19/08/2019 NBE-5AC-Gen2 Quick Start Guide NBE-5AC-Gen2 Quick Start Guide Fastener (not included) NanoBeam Wall Mount Kit https://dl.ubnt.com/qsg/NBE-5AC-Gen2/NBE-5AC-Gen2_EN.html 7/18...
  • Page 8 19/08/2019 NBE-5AC-Gen2 Quick Start Guide NBE-5AC-Gen2 Quick Start Guide Aiming https://dl.ubnt.com/qsg/NBE-5AC-Gen2/NBE-5AC-Gen2_EN.html 8/18...

  • Page 9: Connecting Power

    19/08/2019 NBE-5AC-Gen2 Quick Start Guide NBE-5AC-Gen2 Quick Start Guide Connecting Power https://dl.ubnt.com/qsg/NBE-5AC-Gen2/NBE-5AC-Gen2_EN.html 9/18...
  • Page 10 19/08/2019 NBE-5AC-Gen2 Quick Start Guide NBE-5AC-Gen2 Quick Start Guide 4.   WARNING: The switch port must comply with the power specifications listed in this Quick Start Guide. https://dl.ubnt.com/qsg/NBE-5AC-Gen2/NBE-5AC-Gen2_EN.html 10/18...
  • Page 11 19/08/2019 NBE-5AC-Gen2 Quick Start Guide NBE-5AC-Gen2 Quick Start Guide Optional Accessing airOS via Wi-Fi Verify connectivity in the airOS® Configuration Interface using the UNMS™ app or Web Portal. Both are available for 15 minutes immediately after you power on the device. If necessary, you can power cycle the device to re-enable its Wi-Fi.

  • Page 12: Web Portal

    19/08/2019 NBE-5AC-Gen2 Quick Start Guide NBE-5AC-Gen2 Quick Start Guide 2. Connect your device’s Wi-Fi to the SSID named: <model>:<MAC Address> Note: Ensure that DHCP is enabled on your Wi-Fi adapter. 3. Launch the app and follow the on-screen instructions. Web Portal 1.

  • Page 13: Installer Compliance Responsibility

    19/08/2019 NBE-5AC-Gen2 Quick Start Guide NBE-5AC-Gen2 Quick Start Guide The airOS Configuration Interface will appear, allowing you to customize your settings as needed. For additional details, refer to the User Guide available at ui.com/download/airmax-ac Installer Compliance Responsibility Devices must be professionally installed and it is the professional installer’s responsibility to make sure the device is operated within local country regulatory requirements.

  • Page 14: Specifications

    19/08/2019 NBE-5AC-Gen2 Quick Start Guide Specifications NBE-5AC-Gen2 Quick Start Guide NBE-5AC-Gen2 Dimensions 189 x 189 x 125 mm (7.44 x 7.44 x 4.92") Weight 530 g (1.17 lb) Gain 17 dBi Networking Interface (2) 10/100/1000 Ethernet Ports Wi-Fi for Management...

  • Page 15: Safety Notices

    19/08/2019 NBE-5AC-Gen2 Quick Start Guide Operating Frequency (MHz) NBE-5AC-Gen2 Quick Start Guide U-NII-3 5725 - 5850 Management Radio (MHz) Worldwide 2412 - 2472 US/CA 2412 - 2462 Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings.

  • Page 16: Important Note

    19/08/2019 NBE-5AC-Gen2 Quick Start Guide NBE-5AC-Gen2 Quick Start Guide Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

  • Page 17: Avis Important

    19/08/2019 NBE-5AC-Gen2 Quick Start Guide This equipment should be installed and operated with minimum distance 29 cm between the NBE-5AC-Gen2 Quick Start Guide radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

  • Page 18: Rohs/Weee Compliance Statement

    Operation in the 5.8 GHz frequency band is prohibited in BFWA member states. Other countries listed may use the 5.8 GHz frequency band. RoHS/WEEE Compliance Statement Declaration of Conformity Online Resources © 2016-2019 Ubiquiti Inc. All rights reserved. https://dl.ubnt.com/qsg/NBE-5AC-Gen2/NBE-5AC-Gen2_EN.html 18/18...

Table of Contents