Basic Wiring Example - Danfoss VLT HVAC Drive FC 102 Design Manual

How to Install

5.2.13 Basic Wiring Example

1. Mount terminals from the accessory bag to the
front of the frequency converter.
2. Connect terminals 18 and 27 to +24 V (terminal
12/13)
Default settings:
18 = latched start
27 = stop inverse
12 13 18 19 27 29 32
Start Stop inverse
Speed
Start (18)
Start (27)
Illustration 5.87 Terminal 37 available with Safe Torque Off
Function only.
MG16C202
Design Guide
33 20 37
Safe Stop
Danfoss A/S © Rev. 05/2014 All rights reserved.
5 5
139