Paper Rolls; Setting Up Your Eftpos Equiment; Transactions Overview - PAX S300 Combo User Manual

PAPER ROLLS

S80/c and S800 terminals use standard 57mm (w) x 50mm (dia) thermal paper rolls.
Replacing printer paper:
1. Engage printer cover release flap to open printer bay.
2. Remove existing roll core and place new roll in printer well (when replacing a paper roll, the
tongue of paper should be feeding up and over; out towards the top of the terminal).
3. Pull out tongue of paper so it is coming out of feeder and close the printer cover.
To order paper rolls or other accessories please contact Smartpay on 0800 476 278 or visit our
website smartpay.co.nz
SETTING UP YOUR EFTPOS EQUIPMENT
Please read the Getting Started Letter that is provided with your Smartpay EFTPOS equipment. Our
technical helpdesk team (THD) can be contacted if you would like any assistance and to release the
security key and perform your initial Logon.
1. Place the S80/c or S800 base unit face down on the counter.
2. Plug the barrel end connector of the power adapter cord, into the "POWER" socket.
3. Plug the appropriate communication cords into their communication sockets:
- For Broadband/Fibre Internet plug the Ethernet cable into the "LAN" socket.
- For Dial-up Internet plug the phone cable into the "LINE" socket.
4. Plug the S300 cord into the "PINPAD" socket.
5. Tuck cables into the recessed cable tidy guides as required.
6. Turn all hardware right side up.
7. Plug into mains power and switch on by pressing and holding the power button on base unit.
8. Terminal will perform boot up sequence.
9. Contact Smartpay THD to release security key and perform initial Logon.

TRANSACTIONS OVERVIEW

For a more consistent contactless card experience the swipe/insert quick start option has been
removed. To follow best security practices for payment card handling the customer should always
present their own card (swipe/insert/tap) to the terminal wherever possible.
In a 2-piece EFTPOS setup – once the transaction has prompted for a card it can only be cancelled on
the S300 PINpad.
Smartpay User Guide
Pax S300 Combo
(with S800 or S80/c)
5