MERCHANT & COMMUNICATION SETTINGS
NETWORK SIGNAL ICONS
On the S300 PINpad you will see one or more of the following icons appear in the top right corner.
20/05/17 10:00
20/05/17 10:00
20/05/17 10:00
20/05/17 10:00
20/05/17 10:00
BROADBAND/FIBRE AND DIAL-UP SETTINGS
Changes to comms being used by your EFTPOS terminal are made in the APP MANAGER menu. Please
contact Smartpay THD for assistance before you attempt to use this menu.
• Press CANCEL → FUNCTION (or MENU) to exit idle screen and access APP MANAGER MENU
• Select 1.CONFIG → Select 2.COMMS
TERMINAL COMMS
1. ETHERNET
2. DIAL UP
REBOOT REQUIRED
TERMINAL WILL
POWER DOWN NOW
TMS
Smartpay Terminal Management System provides remote access software updates and configuration
changes for your terminal.
We use this from time to time to ensure our customers have the most up-to-date, secure and bug free
software on their units. Please contact Smartpay THD for assistance before you attempt to use this menu.
• Press CANCEL → FUNCTION (or MENU) to exit idle screen and access APP MANAGER MENU
• Select 2.TMS
0800 476 278 -
SP126194251-0217
Not Connected
Connecting/Disconnecting
Connected
Sending
Receiving
• Press 1 to configure Broadband/Fibre Internet connection
• Press 2 to configure Dial-up Internet connection
•
smartpay.co.nz
Option 2
Terminal requires reboot after any comms changes. If this does
not happen automatically, please perform a manual reboot by
powering terminal off and back on.)