Flush mounting – hollow bricks
What You Need:
Brick flush mounting box, Part No. 9151001
®
For 2N
Helios Safety:
Mounting frame, Part No. 9152000
Flush mounting – plasterboard wall
What You Need:
Plasterboard flush mounting box, Part No.
9151002
®
For 2N
Helios Safety:
Mounting frame, Part No. 9152000
Caution
The warranty does not apply to the product defects and failures arisen as
a
result
of
manufacturer is neither liable for damages caused by theft within an area
that is accessible after the attached electric lock is switched. The product
is not designed as a burglar protection device except when used in
combination with a standard lock, which has the security function.
When the proper mounting instructions are not met, water might get in
and destroy the electronics. It is because the intercom circuits are under
continuous voltage and water infiltration causes an electro-chemical
reaction. The manufacturer's warranty shall be void for products damaged
in this way!
Mechanical Installation
improper
mounting
(in
contradiction
herewith).
2.2
The
12