Arrival/Departure, Day/Night Modes - 2N Helios Force Installation Manual

Arrival/Departure, Day/Night Modes

2N® Helios Force / Safety can identify easily where to 'route' (switch) a call after a
button is pressed. All you have to do is call the intercom and enter the following:
I'm leaving:
I'm back:
All buttons can be switched all at once by a common Day/Night password or
individually by separate Departure/Arrival passwords.
How does switching work?
Every button has memories for 6 numbers (intended primarily for Automatic

Multiple Number Dialling).
If the Automatic Multiple Number Dialling mode is OFF, memory 1 is used for the

Day mode and memory 3 for the Night mode. This is a simple two-number
switching.
If the Automatic Multiple Number Dialling mode is ON, memories 1, 2, 3, 4, 5,

6 are used for the Day mode and memories 3, 4, 5, 6 are used for the Night
mode in the above-mentioned order. This accelerates the process; numbers that
would not be answered are skipped over.
If the Night mode is on and memories 3 to 6 are empty, memories 1 and 2 are

used.
If the Night mode is on, memories 1 and 2 are omitted for all buttons and this

cannot be disabled individually using the Arrival function.
In the Day mode, the buttons assigned to persons who used the Departure

function (are on a leave) shall remain in the Night mode until the same persons
use the Arrival function (after the leave, e.g.).
Example 1 – administration building, automatic dialling is off:
Button 01: labelled Mr. Smith, memory 1 = Mr. Smith's line, memory 3 – secretary's
line, password for button 01 is 777.
8. Mr. Smith is leaving for holiday. He calls the intercom and enters:
777
9. A visitor comes, presses Mr. Smith's button – the intercom calls the secretary.
10. Mr. Smith comes back. He calls the intercom and enters:
Example 2 – family house, Silent Automatic Multiple Number Dialling:
Button 01: labelled The Johnsons, memory 1 = living room, 2 = workshop, 3 = Mr.
Johnson's mobile telephone, 4 = Mrs. Johnson's mobile telephone. Arrival/Departure
password for button 01 is 333.
11. The family is leaving for holiday. They call the intercom and enter:
333
12. A visitor presses the Johnsons' button – the intercom calls Mr. Johnson's
mobile phone and, if unsuccessful, Mrs. Johnson's mobile phone.
password
password
1
1 .
Section for Advanced Users 3.4
777 0.
46