Daily Use - Electrolux EOB8857AAX User Manual

2. Put all the reaction zones of the strip
into the water for approximately 1
second.
Do not put the strip into the running
water!
3. Shake the strip to remove the excess
of the water.
4. After 1 minute check the hardness of
the water according to the table
below.
The colours of the reaction zones
continue to change after 1 minute.
Do not consider this in the
measurement.
5. Set the hardness of the water in the
menu: Basic Settings.
Test strip

6. DAILY USE

WARNING!
Refer to Safety chapters.
6.1 Navigating the menus
1. Activate the appliance.
2. Press
option.
6.2 The menus in overview
Main menu
Sym‐ Menu item
bol
Heating Functions
Recipes
Favourites
Cleaning
Basic Settings
Specials
Hardness of the
water
1
or to select the menu
Test strip
The black squares in the table
correspond to red squares on the test
strip.
You can change the hardness level of
the water in the menu: Basic Settings /
Water hardness.
3. Press
accept the setting.
At each point you can go
back to the main menu with
.
Application
Contains a list of heating functions.
Contains a list of automatic programmes.
Contains a list of favourite cooking pro‐
grammes created by the user.
Contains a list of cleaning programmes.
Used to set the appliance configuration.
Contains a list of additional heating functions.
ENGLISH
Hardness of the
water
2
3
4
to move to the submenu or
11