Electrolux EOB8857AAX User Manual page 19

When it is necessary to
change the weight or the
core temperature of the dish,
use or
values.
6.7 Activating a heating
function
1. Activate the appliance.
2. Press to confirm.
3. Set the temperature.
4. Press to confirm.
6.8 Steam cooking
The water drawer cover is in the control
panel.
WARNING!
Use only cold tap water. Do
not use filtered
(demineralised) or distilled
water. Do not use other
liquids. Do not put
flammable or alcoholic
liquids into the water drawer.
1. Press the cover of the water drawer
to open it.
2. Fill the water drawer with cold water
to the maximum level (around 950
ml) until the acoustic signal sounds
or the display shows the message.
The water supply is sufficient for
approximately 50 minutes.Do not fill
the water drawer over its maximum
capacity. There is a risk of water
leakage, overflow and furniture
damages.
3. Push the water drawer to its initial
position.
4. Turn the appliance on.
5. Set a steam heating function and the
temperature.
6. If necessary, set the function
Duration or End Time
The first steam shows after
approximately 2 minutes. An acoustic
signal sounds when the appliance is
at approximately the set temperature.
The signal sounds at the end of the
cooking time.
to set the new
.
7. Turn the appliance off.
8. Empty the water drawer after the
steam cooking is completed.
Refer to the cleaning function: Tank
Emptying.
CAUTION!
The appliance is hot.
There is a risk of burns.
9. After Steam Cooking steam can
condensate on the bottom of the
cavity. Always dry the bottom of the
cavity when the appliance is cool.
Let the appliance dry fully
with the door open. To
speed up the drying you can
close the door and heat up
the appliance with True Fan
Cooking at temperature
150°C for approximately 15
minutes.
When the water drawer is
running out of water, an
acoustic signal sounds and
the water drawer needs to
be refilled to continue the
steam cooking as described
above.
6.9 Heat-up indicator
When you activate a heating function,
the bar on the display comes on. The bar
shows that the temperature increases.
When temperature is reached the buzzer
sounds 3 times and the bar flashes and
then disappears.
6.10 Fast Heat Up Indicator
This function decreases the heat-up
time.
Do not put food in the oven
when the Fast heat up
function operates.
To activate the function, hold
seconds. The heat-up indicator
alternates.
ENGLISH 19
for 3