Fax Management; Setting Up The Module For Fax - Wavecom WMO1-G900 User Manual

Wavecom GSM Modem

10. Fax management

The firmware you have been provided with includes the fax service
(Group3, Class1)
The fax functionalities of this version have been tested and they are fully
functional in several countries with the following fax softwares : Delrina
Winfax, Trio, MS Winfax. However, the fax functions might work in other
countries and with other fax softwares.

10.1. Setting up the module for fax

The GSM unit as well as the PC fax application have to be properly set
up prior to send/receive faxes.
The only thing to do is to change the serial link rate as follows:
a) Launch any terminal application on PC and set it up to 9600 baud.
b) From the terminal application type in: AT+IPR = 2400; &W <enter>
The GSM unit should reply OK (if not, type in 'AT<enter>' as long as it
does not answer 'OK' and start again stage b).
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
60