Echo E; Fixed Dte Rate +Ipr; Back To Online Mode O - Wavecom WMO1-G900 User Manual

Wavecom GSM Modem
Application to GSM
GSM to application
Application to GSM
GSM to application
Default value is stored in E2PROM.
7.3. Echo
Determines whether the mobile echoes (sends) the commands you enter
to your computer screen as you type them..
Application to GSM
GSM to application
Application to GSM
GSM to application
7.4. Fixed DTE rate
This commands specifies the data rate at which the DCE will accept
commands.
Application to GSM
GSM to application
Application to GSM
GSM to application
Application to GSM
GSM to application
7.5. Back to online mode
If you have established a connection and the mobile is in online
command mode, this command allows to return to online data mode.
Application to GSM
GSM to application
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
AT+CRC=0
OK
AT+CRC=1
OK
E
ATE0
OK
ATE1
OK
AT+IPR?
+IPR: 9600
OK
AT+IPR=?
+IPR:(),(2400,9600,19200,38400,576
00,115200)
OK
AT+IPR=38400
OK
ATO
OK
extended reports disabled
command valid
extended reports enabled
command valid
no local echo
command valid
local echo
command valid
+IPR
current rate is 9600 bps
possible
autodectable rate supported
new rate is 38400 bps
O
command valid
values. No
46