Csas; Cres; Show Text Mode Parameters +Csdh; Select Te Character Set +Cscs - Wavecom WMO1-G900 User Manual

Wavecom GSM Modem
5.5. Save settings
All settings specified in command +CSCA, +CMGF, +CSMP, +CNMI,
+CSDH are stored in E2PROM if the SIM card is phase 1 or in the SIM card if
this one is phase 2.
Application to GSM
GSM to application
5.6. Restore settings
All settings specified in command +CSCA, +CMGF, +CSMP, +CNMI,
+CSDH are restored from E2PROM if the SIM card is phase 1 or from the
SIM card if this one is phase 2.
Application to GSM
GSM to application
5.7. Show text Mode Parameters
This commands gives more informations in text mode result codes.
These informations are in brackets in commands +CMTI, +CMT, +CDS,
+CMGR, +CMGL.
Application to GSM
GSM to application
5.8. Select TE character set
This commands informs the ME which character set is used by the TE.
ME is then able to convert character strings correctly. This is used for
commands +CMGS in text mode.
Application to GSM
GSM to application
Application to GSM
GSM to application
This confidential document is the property of WAVECOM and may not be copied or circulated without permission

+CSAS

AT+CSAS
OK

+CRES

AT+CRES
OK
AT+CSDH?
+CSDH: 0
OK
AT+CSCS="GSM"
OK
AT+CSCS="PCCP437"
OK
Store
command correct
Restore
command correct
+CSDH
current value
do not show header values
+CSCS
GSM default alphabet
Command valid
PC character set Code
Page 437
Command valid
32