Colp - Wavecom WMO1-G900 User Manual

Wavecom GSM Modem
GSM to application
Application to GSM
GSM to application
6.7. Connected line identification presentation
This command allows control of the connected line identification
presentation supplementary service.
* <n> : (result code presentation status in the TA)
Application to GSM
GSM to application
Application to GSM
GSM to application
Application to GSM
GSM to application
Application to GSM
GSM to application
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
RING
+CLIP: 146290800,145
AT+CLIP=0
OK
AT+COLP=<n>
AT+COLP=1
OK
AT+COLP?
+COLP: 1,"x"
OK
ATD146290800;

+COLP: 146290928,145

OK
AT+COLP=0
OK
incoming call
CLIP OFF
command valid
0 disable
1 enable
COLP on
command valid
ask for current functionality
"x" = 0 COLP not provisionned
"x" = 1 COLP provisionned
"x" = 2 unknown (no network ...)
outgoing call
COLP OFF
command valid
+COLP
43