At Commands For Short Messages; Parameters Definition - Wavecom WMO1-G900 User Manual

Wavecom GSM Modem
5.

AT commands for short messages

5.1. Parameters definition

<da> is the destination address.
<dcs> is the data coding scheme and is coded like in document [5].
<dt> is the discharge time.
<fo> is coded like first octet of SMS-SUBMIT in document [4].
<index> is the place of storage in memory.
<length> is the number of characters in text mode or the length of data
binary string in PDU mode.
<mr> is the message reference.
<oa> is the originator address.
<pid> is the protocol identifier.
<pdu> is the binary string coded as specified in document [4]
<ra> is the recipient address.
<sca> is the address of the service center.
<scts> is the service center time stamp.
<st> is the status.
<stat> is the status of message in memory.
<tooa> is the integer format of <oa>.
<tora> is the integer format of <ra>.
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
29