Failure Result Codes; Report Mobile Equipement Errors +Cmee; Extended Error Report +Ceer - Wavecom WMO1-G900 User Manual

Wavecom GSM Modem
9.

Failure result codes

9.1. Report Mobile Equipement errors
This
+CME ERROR : <xxx> or +CMS ERROR :<xxx>
Application to GSM
GSM to application
Application to GSM
GSM to application
9.2. Extended error report
If the last call setup (originating or answering) fails, this command gives
the reason of the call release.
Application to GSM
GSM to application
Application to GSM
GSM to application
The cause information element from GSM 04.08 is given below.
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
command disables
AT+CMEE=0
OK
AT+CMEE=1
OK
ATD123456789 ;
NO CARRIER
AT+CEER
+CEER : Error <xxx>
OK
+CMEE
or enables the
disable « +CME ERROR : <xxx> »
and use « ERROR » instead
enable « +CME ERROR : <xxx> »
+CEER
outgoing voice call
ask for reason of release
<xxx> is the cause information
element values
recommandation 04.08
use of result code
from GSM
52