Call Waiting +Ccwa - Wavecom WMO1-G900 User Manual

Wavecom GSM Modem
for <fac> see +CLCK command.
Application to GSM
GSM to application
Application to GSM
GSM to application
Application to GSM
GSM to application
6.4. Call waiting
This command allows control of the call waiting supplementary service.
The module supports only one communication. If a call waiting call happens,
the module will disconnect it.
The command to manage this functionality is :
* <n> : (result code presentation status in the TA)
* <mode> :
Application to GSM
GSM to application
Application to GSM
GSM to application
GSM to application
Application to GSM
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
AT+CPWD=<fac>,<oldpassword>, <newpassword>
AT+CPWD="AO",1234,5555
OK
AT+CPWD="AO",1234,5555
+CME ERROR: 16
AT+CPWD="AO",5555,1234
OK
+CCWA
AT+CCWA=<n>,<mode>[, <class>]
AT+CCWA=1,1
OK
AT+CCWA=1,2
+CCWA="x",7
OK
RING
+CCWA:
+146290800,145,7
NO CARRIER
AT+CCWA=1,0
change password
Password was good
Change password
password wrong
change password
Password was good
0 disable
1 enable
0 disable
1 registration
2 interrogate
enable call waiting
command valid
interrogate call forwarding unconditional
"x" = 1 active
"x" = 0 not active
incoming call
number of the incoming call
incoming call is disconnected
erase call waiting
41