Table of Contents
Advertisement
Quick Links
Wavecom GSM Modem
Wavecom GSM MODEM WMO1-G900
This document is the property of WAVECOM, and is transferred to ______________________________ under
the conditions of the active Non-Disclosure Agreement dated __________. Use of this document is subject to
the terms of this NDA. This document will be returned to WAVECOM under request.
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
Date:
Reference: WCOM/GSM/WMO1-G900/modATcmd
7.3
Version:
21 December 97
1
Advertisement
Table of Contents
Related Manuals for Wavecom WMO1-G900
Summary of Contents for Wavecom WMO1-G900
- Page 1 Non-Disclosure Agreement dated __________. Use of this document is subject to the terms of this NDA. This document will be returned to WAVECOM under request. Version: 21 December 97 Date: Reference: WCOM/GSM/WMO1-G900/modATcmd This confidential document is the property of WAVECOM and may not be copied or circulated without permission...
- Page 2 Modifications for error codes 16-10-97 Add Network & SIM lock (+CLCK, +CPWD) 21-12-97 Add phonebook management (+CPBS, +CPBR, +CPBF, +CPBW) Add Fax management This confidential document is the property of WAVECOM and may not be copied or circulated without permission...
-
Page 3: Table Of Contents
4.6. P +CPAS....................21 HONE ACTIVITY STATUS 4.7. P +CPOF........................21 OWER OFF 4.8. S +CFUN....................22 ET PHONE FUNCTIONALITY 4.9. E PIN/PUK +CPIN......................23 NTER CODE This confidential document is the property of WAVECOM and may not be copied or circulated without permission... - Page 4 CHARACTER FRAMING 7.7. R A/ ......................47 EPEAT LAST COMMAND 7.8. D Z......................47 EFAULT CONFIGURATION 7.9. DTE-DCE +IFC..................48 LOCAL FLOW CONTROL 7.10. S &C.........................48 SIGNAL This confidential document is the property of WAVECOM and may not be copied or circulated without permission...
- Page 5 ......................62 IMITATION OF ESPONSES 11.2. A ! ......................62 TTENTION FOR SERS 11.3. RF SAFETY ..........................63 11.4. GENERAL SAFETY .........................65 11.5. SAFETY STANDARDS ......................67 This confidential document is the property of WAVECOM and may not be copied or circulated without permission...
-
Page 6: Introduction
The following GSM reference documents are recommended: ETSI GSM 03.40 GSM 03.45 GSM 04.11 GSM 04.21 GSM 05.08 GSM 07.01 GSM 07.02 GSM 07.05 GSM 07.07 This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 7: Etsi Contact
Power Supply: 10,8...31,2 V/DC (worst case, including application board on basis DS 87C520/PLCC44) 325 mA transmit mode 10,8V 47 mA idle mode 10,8V This confidential document is the property of WAVECOM and may not be copied or circulated without permission... - Page 8 (pin 1, 2, 3, 4 not used) ∗ Interface D: Power supply RJ11 connector white +10,8 - 31,2V yellow, green not used brown ground This confidential document is the property of WAVECOM and may not be copied or circulated without permission...
- Page 9 Bs 24, BS 25, Bs 26 ∗ ∗ Short Message Service: GSM 03,40, 07.05 • SMS mobile originated • SMS mobile terminated • CBS Text mode /PDM mode This confidential document is the property of WAVECOM and may not be copied or circulated without permission...
-
Page 10: Audio Interface
• Loudspeaker : Impedance 150Ω / Outputs level : 0 - 2.5V p.p max • Power 6V regulated DC • ground • shield This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 11: At Commands Features
Examples : AT+CGSN<CR> <CR><LF>123456789<CR><LF> <CR><LF>OK<CR><LF> In the following examples <CR> and <CR><LF> will be intentionally omitted. This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 12: At Commands For Call Control
(usually 00) but need to be replaced by the '+' character. Example : to establish a voice call to Wavecom from another country, the AT command shall be : This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 13: Hang -U P Commandh
The GSM module sends "NO CARRIER" to the application, and set the DCD signal. This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 14: Dtmf Signals +Vtd, +Vts
Exemple : to send the Tone sequence 13#, the application shall send : AT+VTS=1 and then wait for AT+VTS=3 and then wait for AT+VTS=# and then wait for This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 15: Operator Selection +Cops
3.7. Redial last number ATDL This command is used by the application to redial the last number used in the command ATD. The application sends : This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 16: Signal Quality +Csq
Current value GSM to application always 3 characters with leading zeros Application to GSM ATS0=0 no automatic answer GSM to application command valid This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 17: Vgr, +Vgt
16 levels for receive gain are provided and 8 levels for transmit gain. Application to GSM AT+VGR=25 GSM to application command valid Application to GSM AT+VGT=45 GSM to application command valid This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 18: T +Sidet
<val2 attenation <val1> presence > - 18 db Echo is disabled - 24 db Echo is enabled -30 db - 36 db This confidential document is the property of WAVECOM and may not be copied or circulated without permission... - Page 19 Wavecom GSM Modem Application to GSM AT+ECHO=1,0 GSM to application command valid Application to GSM AT+ECHO? current value GSM to application +ECHO: 1,0 command valid This confidential document is the property of WAVECOM and may not be copied or circulated without permission...
-
Page 20: At Commands For Sim, E2Prom
4.3. Request revision identification +CGMR This command is used to get the software version. Application to GSM AT+CGMR get software version GSM to application V2.74 command valid This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 21: Cgmi
4.7. Power off +CPOF This command stops the GSM software stack and then the hardware layer. Application to GSM AT+CPOF GSM to application command valid This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 22: Cfun
GSM to application command valid Application to GSM AT+CFUN=1,1 set full functionality with reset GSM to application command valid This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 23: Enter Pin/Puk Code +Cpin
+CME ERROR: <err> SIM failure, SIM absent etc. Please note that in this case the mobile does not finish its response with the OK string. This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 24: Remark
In the way Application to GSM, an "h" character shall be added before the PIN value if cyphering mode (with D.E.S algorithm ) is on. See +EXPKEY command. Same remark for +CLCK and +CPWD commands. This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 25: Clck
+CLCK : ("PS","SC","AO","OI", "OX", supported facilities "AI", "IR","AB", "AG","AC", "WNL") Application to GSM AT+CLCK="WNL",1,12345678 Activate network lock GSM to application Network lock activated This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 26: Change Password +Cpwd
+CPBS: ("SM") SIM phonebook supported Application to GSM AT+CPBS ? Status GSM to application +CPBS : "SM",10,20 SIM phonebook selected, used locations, locations This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 27: Read Phonebook Entries +Cpbr
+CPBF : 15,"+331290101",145, "Eric" field starting with "E" Application to GSM AT+CPBF="H" Read entries with "H" GSM to application +CME ERROR: 22 Entry not found This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 28: Write Phonebook Entiy +Cpbw
Application to GSM AT+CPBW=7,"0122334455",129 ,"WA Write at loc 7 a long Text VECOM TEL" (11 characters) GSM to application +CME ERROR: 24 Text too long This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 29: At Commands For Short Messages
<st> is the status. <stat> is the status of message in memory. <tooa> is the integer format of <oa>. <tora> is the integer format of <ra>. This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 30: Csms
(document [4] for the format of the binary string). In Text mode, every commands and responses are in ASCII characters. The chosen format is stored in E2PROM by the command +CSAS. This confidential document is the property of WAVECOM and may not be copied or circulated without permission... - Page 31 TPDU in hexadecimal format must be converted into two ascii characters. E.G octet with hexadecimal value 0x2A is presented to the mobile as two characters ‘2’ (ascii 50) and ‘A’ (ascii 65). This confidential document is the property of WAVECOM and may not be copied or circulated without permission...
-
Page 32: Csas
GSM default alphabet GSM to application Command valid Application to GSM AT+CSCS="PCCP437" PC character set Code Page 437 GSM to application Command valid This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 33: New Message Indication +Cnmi
<bm> (the rules for storing received CBMs Types depend on its coding scheme, the setting of Select CBM Types (+CSCB) and this value) : no CBM indications are routed to the TE. This confidential document is the property of WAVECOM and may not be copied or circulated without permission... - Page 34 AT+CNMI=0,2,0,0,0 <mt>=2 GSM to application GSM to application +CMT :"123456","13/01/96 Message received 12h30m00s",129,4,32,240,"15379",129 ,5<CR><LF> HELLO Application to GSM AT+CNMI=0,0,0,1,0 <ds>=1 GSM to application This confidential document is the property of WAVECOM and may not be copied or circulated without permission...
-
Page 35: Cmgr
GSM to application +CMS ERROR: 321 error : invalid index Application to GSM AT+CMGR=1 in PDU mode GSM to application +CMGR: "REC READ", <length><CR><LF><pdu> This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 36: Cmgl
+CMGL: 2, "REC READ", "43322449",20<CR> Keep cool Application to GSM AT+CMGL=2 read + bad index GSM to application +CMS ERROR: 321 error : invalid index This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 37: Send Message +Cmgs
( 8 bits -> 7 bits ) Application to GSM AT+CSMP=16,32,64,244 validity period = 32 dcs = GSM 8 bits alphabet GSM to application command correct This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 38: Cmgd
GSM to application Application to GSM AT+CMGS="+33146290800"<CR> Send again same Hello, how are you ?^Z message GSM to application : +CMGS : 1 Successful transmission This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 39: At Commands For Supplementary Services
GSM to application +CCFC=1,7,146290800 call forwarding active Application to GSM AT+CCFC=0,4 erase call forwarding unconditional GSM to application command valid This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 40: Clck
+CPWD This command shall be used by the application to change the supplementary service password. The command to manage this functionality is : This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 41: Call Waiting +Ccwa
RING incoming call +CCWA: number of the incoming call +146290800,145,7 incoming call is disconnected NO CARRIER Application to GSM AT+CCWA=1,0 erase call waiting This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 42: Calling Line Identification Restriction +Clir
GSM to application +CLIP: 1,"x" "x" = 0 CLIP not provisionned "x" = 1 CLIP provisionned "x" = 2 unknown (no network ...) This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 43: Colp
"x" = 2 unknown (no network ...) Application to GSM ATD146290800; outgoing call GSM to application +COLP: 146290928,145 Application to GSM AT+COLP=0 COLP OFF GSM to application command valid This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 44: At Commands For Data
Non transparent preferred Application to GSM AT+CBST=7,0,1 ask for a bearer GSM to application bearer supported Application to GSM AT+CBST=81,0,0 ask for a bearer This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 45: Cr, +Crc
These extended indications are : +CRING: ASYNC for asynchronous transparent +CRING: REL ASYNC for asynchronous non-transparent +CRING: VOICE for normal speech. +CRING : FAX for fax calls This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 46: Echo E
If you have established a connection and the mobile is in online command mode, this command allows to return to online data mode. Application to GSM GSM to application command valid This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 47: Dte-Dce Character Framing +Icf
+ICF: (0-6),(0-3) possible values. Application to GSM AT+ICF=0,0 GSM to application new values 7.7. Repeat last command Application to GSM repeat last command This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 48: Default Configuration
Application to GSM AT+IFC=0,0 GSM to application new values 7.10. Set DCD signal &C This commands controls the Data Carrier Detect (DCD) signal. This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 49: Set Dtr Signal &D
This commands writes the active configuration to nonvolatile RAM. Application to GSM AT&W writes current configuration to E2prom GSM to application command valid This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 50: Radio Link Protocol Parameters +Crlp
Application to GSM AT+CRLP=10,10,90,10,0 set new parameters GSM to application command valid Application to GSM AT+CRLP? current values GSM to application AT+CRLP: 10,10,90,10 command valid This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 51: Other At Commands
All the remaining commands are implemented in WAVECOM's AT parser. An "+CME ERROR : 4" string will be sent back but no further software treatment will happen. This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 52: Failure Result Codes
+CEER : Error <xxx> <xxx> is the cause information element values from recommandation 04.08 The cause information element from GSM 04.08 is given below. This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 53: Mobile Equipment Error Result Code : +Cme Error
SIM failure Invalid memory index SIM memory full SC address unknown Error cause values from GSM 04.11 are given below. This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 54: Cause Information Element Values From Gsm Recommandation 04.08
Destination out of order Invalid number format (incomplete number) Facility rejected Response to STATUS ENQUIRY Normal, unspecified No circuit/channel available Network out of order Temporary failure This confidential document is the property of WAVECOM and may not be copied or circulated without permission... - Page 55 Service or option not implemented, unspecified Invalid transaction identifier value User not member of CUG Incompatible destination Invalid transit network selection Semantically incorrect message Invalid mandatory information This confidential document is the property of WAVECOM and may not be copied or circulated without permission...
- Page 56 All other values in the range 96 to 111 shall be treated as cause 111. All other values in the range 112 to 127 shall be treated as cause 127. This confidential document is the property of WAVECOM and may not be copied or circulated without permission...
-
Page 57: Gsm 04.11 Annex E-2: Mobile Originating Sm-Transfer
(i.e. IMSI not known) Cause no 29: "Facility rejected" This cause indicates that the facility requested by the Mobile Station is not supported by the PLMN. This confidential document is the property of WAVECOM and may not be copied or circulated without permission... - Page 58 Cause no 95: "Invalid message, unspecified" This cause is used to report an invalid message event only when no other cause in the invalid message class applies. This confidential document is the property of WAVECOM and may not be copied or circulated without permission...
- Page 59 This confidential document is the property of WAVECOM and may not be copied or circulated without permission...
-
Page 60: Fax Management
The GSM unit should reply OK (if not, type in 'AT<enter>' as long as it does not answer 'OK' and start again stage b). This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 61: Setting Up The Pc Fax Application
Therefore, the serial rate should be set back to 9600 (or better 19200) baud by issueing: AT+IPR = 9600; &W <enter> This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 62: Security Advises And Warnings
It is a matter of the chosen power supply to protect the GSM - Set against these influences. This confidential document is the property of WAVECOM and may not be copied or circulated without permission... -
Page 63: Rf Safety
RF energy. In addition, you can reduce RF exposure by operating your cellular modem efficiently by following the below guidelines. This confidential document is the property of WAVECOM and may not be copied or circulated without permission... - Page 64 Use only the supplied or approved antenna. Unauthorized antennas, modifications or attachments could damage the modem and may contravene local RF emission regulations or invalidate type approval. This confidential document is the property of WAVECOM and may not be copied or circulated without permission...
-
Page 65: General Safety
Turn your modem OFF before boarding any aircraft. • Use it on the ground only with crew permission. • Do not use in the air. This confidential document is the property of WAVECOM and may not be copied or circulated without permission... - Page 66 (such as propane or butane) ensure that the vehicle complies with the relevant fire and safety regulations of the country in which the vehicle is to be used. This confidential document is the property of WAVECOM and may not be copied or circulated without permission...
-
Page 67: Safety Standards
: • Directives of the European Community, Directorate General V in Matters of Radio Frequency Electromagnetic Energy This confidential document is the property of WAVECOM and may not be copied or circulated without permission...
Need help?
Do you have a question about the WMO1-G900 and is the answer not in the manual?
Questions and answers