Wavecom WMO1-G900 User Manual page 34

Wavecom GSM Modem
1 If CBM is stored into ME/TA, indication of the memory location is routed
to the TE using unsolicited result code :
+CBMI : <mem>, <index>
2 New CBMs are routed directly to the TE using unsolicited result code.
+CBM : <length><CR><LF><pdu> (if PDU mode chosen)
or
+CBM :<sn>,<mid>, <dcs>,<page>,<pages><CR><LF><data>
mode-enabled)
3 class 3 SMS-DELIVERS are routed directly using code in <mt>=2 ;
message of other classes result in indication <mt>=1
<ds> (for SMS-STATUS-REPORTs) :
0 no SMS-STATUS-REPORTs are routed.
1 SMS-STATUS-REPORTs are routed using unsolicited code :
+CDS : <pdu> (if PDU mode chosen)
or
+CDS : <fo>,<mr>[,<ra>,<tora>],<scts>,<dt>,<st>
<bfr>
0 TA buffer of unsolicited result codes defined within this command is
flushed to the TE when <mode> 1...3 is entered (OK response shall be
given before flushing the codes)
1 TA buffer of unsolicited result codes defined within this command is
cleared when <mode> 1...3 is entered.
Examples :
Application to GSM
GSM to application
GSM to application
Application to GSM
GSM to application
GSM to application
Application to GSM
GSM to application
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
AT+CNMI=0,1,0,0,0
OK
+CMTI : « SM », 1
AT+CNMI=0,2,0,0,0
OK
+CMT :"123456","13/01/96
12h30m00s",129,4,32,240,"15379",129
,5<CR><LF>
HELLO
AT+CNMI=0,0,0,1,0
OK
<mt>=1
Message received
<mt>=2
Message received
<ds>=1
(text
34