Signal Quality +Csq; Network Registration +Creg; Ats0 - Wavecom WMO1-G900 User Manual

Wavecom GSM Modem
Application to GSM
GSM to application
3.8. Signal Quality
This command shall be used to know the signal strength indication.
Application to GSM
GSM to application

3.9. Network registration +CREG

This command is used by the application to know the registration status
of the mobile.
Application to GSM
GSM to application
Application to GSM
GSM to application
3.10. Automatic answer
This S-parameter controls the automatic answering feature of the mobile.
Application to GSM
GSM to application
Application to GSM
GSM to application
Application to GSM
GSM to application
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
ATDL
0146290800;
OK
+CSQ
AT+CSQ
+CSQ: <rssi>,<ber>
OK
AT+CREG?
+CREG: 0,<stat>
OK
AT+CREG=1
OK

ATS0=2

OK
ATS0?
002
OK
ATS0=0
OK
redial last number
last call was a speech call
command valid
<rssi> and <ber> as defined in the
GSM TS 07 07
as defined in the GSM TS 07 07
automatically shots on
command valid
ATS0
automatic answer after 2 rings
Current value
always 3 characters with leading
zeros
no automatic answer
command valid
16